## Course curriculum

1. How to use this course

2. Lesson 1: My Tweezers (2:57)

3. Lesson 2: Introduction to bending curves (11:09)

4. Lesson 3: Practicing my curves (16:25)

5. Lesson 4: Introduction to Angles & Straight Lines (9:03)

6. Lesson 5: Practice ; Repeat the same angle and length (6:41)

7. Lesson 6: Combine Angles (2:49)

8. Lesson 7: Combine Lines & Angles (4:44)

9. Lesson 8: Sharp Pointed Angles (15:46)

10. Lesson 9: Spirals (10:14)

11. Lesson 10: Nautilus Spirals (8:26)

1. Lesson 11: Bend a Double Spiral (5:08)

2. Lesson 12: Combining Spirals (4:10)

3. Lesson 13: Bending Double Lines (4:37)

4. Lesson 14: Use a Mandrel to make a curve (2:15)

5. Lesson 15: Use a Mandrel to make a curve (7:03)

6. Lesson 16: Bending Squares (4:19)

7. Lesson 17: Using Straight Line Wires (3:51)

8. Lesson 18: Let's Loosen Up & Play with Wires (8:56)

9. Lesson 19: Let's Loosen Up & Play with Wires (9:53)

10. Lesson 20: Let's Loosen Up & Play with Wires (8:09)

1. Lesson 21:The Angle of the Shape (Bluebird Dreamer Part 1) (9:33)

2. Lesson 22: Bend the Bluebird (Bluebird Dreamer Part 2) (7:12)

3. Lesson 23: Dome My Wires (5:38)

4. Lesson 24: Dome and Glue my wire (8:26)

5. Lesson 25: Summary: How I Dome My Wire (3:51)

6. Lesson 26: Combine Lines to Create Shapes (11:36)

7. Lesson 27: Brainstorm with Wire Lines (7:11)

8. Lesson 28: Play with Wires (to create a story) (10:27)

9. Lesson 29: Assemble My Wires using Registration Marks (Large Spiral Project) (11:38)

10. Lesson 30: Assemble My Wires using Saral Transfer Paper (Large Spiral Project) (7:33)

1. Lesson 31: Bend & Assemble Wires Part 1 (Cityscape) (12:32)

2. Lesson 32: Bend & Assemble my wires Part 2 (Cityscape) (11:44)

3. Lesson 33: Create a Pattern using closed wire shapes (11:01)

4. Lesson 34: Create a Pattern using Open Shapes (18:34)

5. Lesson 35: Create a Radial Pattern using Curved Wires (11:34)

6. Lesson 36: Create a Pattern using small wire angles (8:36)

7. Lesson 37: Anneal My Wires ​(using a hot plate "trinkit" kiln (5:18)

8. Lesson 38: Anneal Wire Shapes ​(using a hot plate "trinkit" kiln (6:55)

9. Lesson 39: Anneal Corrugated Wire using a hot plate kiln (1:35)

10. Lesson 40: Anneal My Wire in a Kiln (1:53) 